Cost Factors · Updated 14 November 2026
What Affects Garage Door
Spring Replacement Cost?
Five things move the bill: how many springs, which type, how heavy the door is, the cycle rating, and what else is fitted on the same visit. Here is each one in dollars, from the same price model as the rest of the site.
| Job | Installed, our estimate |
|---|---|
| One torsion springdoor with a single spring | $110 to $360 |
| Pair of torsion springsmost two-spring residential doors | $145 to $520 |
| Pair, lighter doorup to about 170 lb | $145 to $415 |
| Pair, heavier doorabout 240 to 330 lb | $180 to $520 |
| Pair of extension springs7 ft door, 100 to 200 lb | $130 to $350 |
| High-cycle pair27,000 to 54,000 cycles | $170 to $575 |
| After hours, torsion pairwith a published emergency fee | $145 to $715 |
How we price this: Our ranges are estimates built from published inputs, not quotes: retail spring prices, the service-call and hourly rates in Yelp's cost guide, and job times from HomeAdvisor and Yelp. Low ends are rounded down and high ends up to the nearest $5. Sources, read 13 October 2026: DDM Garage Doors, DIY Garage Door Parts, Yelp cost guide, HomeAdvisor, DDM Garage Doors, high-cycle springs, DDM Garage Doors, door weights, DIY Garage Door Parts, extension springs, Discount Garage Door (Tulsa and OKC) and A1 Garage Door Service. HomeAdvisor and Angi are both owned by Angi Inc., which pays this site a commission for quote requests. (Angi Inc. 2025 Form 10-K)
Show the arithmetic
- One torsion spring replaced (per spring; estimate from stated inputs; includes parts, labor, service call): $110 to $360. parts $35.38 to $157.94, plus labor $75 to $200 (a $75 to $100 service call covering the first hour, plus up to one more hour at $100): $110.38 to $357.94, rounded out to the nearest $5.
- Pair of torsion springs replaced (pair; estimate from stated inputs; includes parts, labor, service call): $145 to $520. parts 2 x $35.38 to 2 x $157.94, plus labor $75 to $200 (a $75 to $100 service call covering the first hour, plus up to one more hour at $100): $145.76 to $515.88, rounded out to the nearest $5.
- Pair, door up to about 170 lb (pair; estimate from stated inputs; includes parts, labor, service call): $145 to $415. parts 2 x $37.48 to 2 x $105.58, plus labor $75 to $200 (a $75 to $100 service call covering the first hour, plus up to one more hour at $100): $149.96 to $411.16, rounded out to the nearest $5.
- Pair, door about 240 to 330 lb (pair; estimate from stated inputs; includes parts, labor, service call): $180 to $520. parts 2 x $53.81 to 2 x $157.94, plus labor $75 to $200 (a $75 to $100 service call covering the first hour, plus up to one more hour at $100): $182.62 to $515.88, rounded out to the nearest $5.
- Pair of extension springs replaced (pair; estimate from stated inputs; includes parts, labor, service call): $130 to $350. parts 2 x $29.92 to 2 x $72.90, plus labor $75 to $200 (a $75 to $100 service call covering the first hour, plus up to one more hour at $100): $134.84 to $345.80, rounded out to the nearest $5.
- Pair of high-cycle torsion springs replaced (pair; estimate from stated inputs; includes parts, labor, service call): $170 to $575. standard torsion pair $145.76 to $515.88, plus the high-cycle parts premium $26.54 to $55.82: $172.30 to $571.70, rounded out to the nearest $5.
- Pair of torsion springs after hours (pair; estimate from stated inputs; includes parts, labor, service call, emergency fee): $145 to $715. torsion pair $145.76 to $515.88, plus an emergency fee of $0 to $199: $145.76 to $714.88, rounded out to the nearest $5.
Parts are priced at what the two suppliers charge the public. Installers buy for less and many mark parts up, and neither figure is published, so a quote's parts line can be higher than ours.
Wage check: The BLS puts the median mechanical door repairer (the occupation that includes garage door mechanics) at $26.79 an hour (May 2025). Wages are 70.0% of private-industry employer costs (June 2026), so that technician costs an employer about $38.27 an hour before the van, insurance, overhead and profit. Yelp's $40 to $100 hourly rate sits at or above that cost, which is what a billed rate should do. (BLS OEWS, 49-9011 Mechanical Door Repairers; BLS Employer Costs for Employee Compensation)
1. One spring or two
The labor is one visit either way, so the second spring adds only its part price, $35.38 to $157.94 at retail. That is why a pair ($145 to $520) costs little more than one spring ($110 to $360). DASMA says that on a two-spring door you should replace both, even if only one has broken. More on this at the cost when one spring breaks.
2. Torsion or extension
Torsion springs sit on a shaft above the door; extension springs run along the horizontal tracks. A torsion pair is $145 to $520 on our estimate and an extension pair $130 to $350, because extension springs cost less ($29.92 to $72.90 each at DIY Garage Door Parts). At the standard grade both are rated about 10,000 cycles (DDM Garage Doors for torsion, Prime-Line for extension); only torsion springs come in high-cycle grades. Converting from extension to torsion is a bigger job, and the guides price it as one: HomeAdvisor: "Converting from extension to torsion springs costs $400 to $800."; CostInspector: "Conversion runs $300–$600.". See torsion vs extension.
3. Door weight
Each spring is sized to the door. Heavier doors need thicker wire, and thicker wire costs more: a pair for a door up to about 170 lb is $145 to $415, and for a door of about 240 to 330 lb $180 to $520. DDM Garage Doors says published door weights "are only approximations", so the technician should size the spring from your door. The torsion spring cost page has the wire size for each weight.
4. Cycle rating
A cycle is one open and one close. In DDM Garage Doors' example for one 150 lb door, a 10,000-cycle pair is $56.56, a 27,000-cycle pair $83.10 and a 54,000-cycle pair $112.38: $27 to $56 more in parts, for the same fitting. Whether it pays depends on how often the door is used and how long you stay; the high-cycle page works out the break-even.
5. What else is fitted on the visit
Cables are the common add-on, because they are under the same tension. Bob Vila (updated April 2024) says a technician can replace the cables for $75 to $200, or $175 to $450 together with a broken spring. Ask for each extra as its own priced line and to see the worn part. See spring and cable replacement cost.
And when you call
An after-hours visit can add a fee. Of the companies we found that publish a policy, Discount Garage Door (Tulsa and Oklahoma City) charges none and A1 Garage Door Service charges a $199 flat emergency trip fee, which puts a torsion pair at $145 to $715. See emergency repair costs, or price your own door with the garage door spring replacement cost calculator.
Frequently Asked
What affects the cost of replacing a garage door spring most?
Whether it is one spring or a pair, the spring type, and the door's weight. On our estimate one torsion spring costs $110 to $360 installed and a pair $145 to $520; a pair for a door up to about 170 lb is $145 to $415 and for a door of about 240 to 330 lb $180 to $520. Extension springs are $130 to $350 a pair.
Does a heavier door cost more to re-spring?
Yes, through the spring. Heavier doors need thicker wire, which costs more: at DDM Garage Doors the springs that lift up to 85 lb each start at $37.48, and those lifting about 120 to 165 lb start at $53.81. The labor is the same visit.
How much does adding cables cost?
Bob Vila (updated April 2024) says a technician can replace the cables for $75 to $200, or $175 to $450 together with a broken spring. DIY Garage Door Parts includes torsion cables with every torsion spring it sells.
Sources (read dates in the method note above): DDM Garage Doors, DIY Garage Door Parts, Yelp cost guide, HomeAdvisor and Bob Vila.